How do you store your jewelry? I'm sure many will answer "in a jewel box,". This was also what I did before I discovered decorative jewelry organizers! I fell in love with these decorations easy to create and inexpensive ...
See this project, I am convinced that you will be charmed too!
You will need:
- A piece of plywood 18 inches long and 2½ inches wide
- 4 wooden rods (18 ")
- Wood glue
- Sand paper
- Varnish or paint
- Frame hook
Cut each end of the board at an angle of 30 degrees, then sand it.
Nail a frame hook behind the board. Be sure to center it. Then apply a varnish or paint and let it dry.
Take measures to place the wooden rods. Draw five lines: one in the center and two others on each side at a distance of 3 inches from each other. Cut one rod in half. Shorten two more rods to 13 inches. In total, you will have 2 rods of 9 ", 2 stems of 13" and one of 18 ".
Place a little bit of glue on the marks, then glue the rods. Allow to dry thoroughly.
And that's what you'll get:
It is sublime, perfect to offer as a gift ... We love all personalized gifts!